Immunization with a peptide mimicking lipoteichoic acid induces memory B cells in BALB/c mice.

BACKGROUND: There is an urgent clinical need for developing novel immunoprophylaxis and immunotherapy strategies against Staphylococcus aureus (S. aureus). In our previous work, immunization with a tetra-branched multiple antigenic peptide, named MAP2-3 that mimics lipoteichoic acid, a cell wall component of S. aureus, successfully induced a humoral immune response and protected BALB/c mice against S. aureus systemic infection. In this study, we further investigated whether vaccination with MAP2-3 can elicit immunologic memory. METHODS: BALB/c mice were immunized with MAP2-3 five times. After one month of the last vaccination, mice were challenged with heat-killed S. aureus via intraperitoneal injection. After a 7-day inoculation, the percentage of plasma cells, memory B cells, effector memory T cells, and follicular helper T cells were detected by flow cytometry. The levels of IL-6, IL-21, IL-2, and IFN-γ were measured by real-time PCR and ELISA. Flow cytometry results were compared by using one-way ANOVA or Mann-Whitney test, real-time PCR results were compared by using one-way ANOVA, and ELISA results were compared by using one-way ANOVA or student's t-test. RESULTS: The percentage of plasma cells and memory B cells in the spleen and bone marrow from the MAP2-3 immunized mice was significantly higher than that from the control mice. The percentage of effector memory T cells in spleens and lymphoid nodes as well as follicular helper T cells in spleens from the MAP2-3 immunized mice were also higher. Moreover, the levels of IL-6 and IL-21, two critical cytokines for the development of memory B cells, were significantly higher in the isolated splenocytes from immunized mice after lipoteichoic acid stimulation. CONCLUSIONS: Immunization with MAP2-3 can efficiently induce memory B cells and memory T cells.

Acid-Doped Pyridine-Based Polybenzimidazole as a Positive Triboelectric Material with Superior Charge Retention Capability.

The energy conversion efficiency of a triboelectric nanogenerator (TENG) is severely limited by the charge density of triboelectric materials, while drastic and unavoidable charge decay happens during contact due to the insufficient charge retention capacity of positive triboelectric materials. Here, elaborately synthesized acid-ion-doped pyridine-based polybenzimidazole processing with strong charge retention capability is demonstrated to couple with negatively corona-polarized electrets. As illustrated by thermal stimulation and an ion mass spectrometer, the formation of acid-ion chimerism processes high activation energy for stored charges, and the selective anion migration can compensate the escape of polarized charge. Accordingly, the charge density can reach up to 596 µC m-2 and the charge retention rate reaches 49.7%, which is so far the highest intrinsic charge density obtained in the open air. Thus, the ionic chimerism strategy provides an effective way to suppress the charge escaping in the open air and gives a great expandable avenue for the material challenges of TENG's practical deployment.

Self-poled piezoelectric polymer composites via melt-state energy implantation.

Lightweight flexible piezoelectric polymers are demanded for various applications. However, the low instinctively piezoelectric coefficient (i.e. d33) and complex poling process greatly resist their applications. Herein, we show that introducing dynamic pressure during fabrication is capable for poling polyvinylidene difluoride/barium titanate (PVDF/BTO) composites with d33 of ~51.20 pC/N at low density of ~0.64 g/cm3. The melt-state dynamic pressure driven energy implantation induces structure evolutions of both PVDF and BTO are demonstrated as reasons for self-poling. Then, the porous material is employed as pressure sensor with a high output of ~20.0 V and sensitivity of ~132.87 mV/kPa. Besides, the energy harvesting experiment suggests power density of ~58.7 mW/m2 can be achieved for 10 N pressure with a long-term durability. In summary, we not only provide a high performance lightweight, flexible piezoelectric polymer composite towards sustainable self-powered sensing and energy harvesting, but also pave an avenue for electrical-free fabrication of piezoelectric polymers.

Water evaporation induced in-situ interfacial compatibilization for all-natural and high-strength straw-fiber/starch composites.

In this paper, we proposed a novel and green strategy based on water evaporation induced in-situ interfacial compatibilization (WEIC) mechanism for fabricating high-strength and all-natural lignocellulose/starch composites. This mechanism exploits the natural compatibility of the lignocellulose and starch and was tested through an internal mixing process with regulated water evaporation. Specifically, we revealed that a restrained layer was in-situ formed at the interface of the lignocellulose and starch during the internal mixing process; a faster water evaporation rate thickens this restrained layer, restricts the starch's molecular movement and significantly increases the composite's mechanical properties. The highest tensile strength and Young's modulus of the composites achieved are 21.7 ± 0.8 MPa and 2.2 ± 0.1 GPa, respectively, superior to many existing starch/lignocellulose composites. Thus, this work provides new insight into the compatibilization of various hydrophilic polysaccharides and paves new avenues for developing greener and more facile methods to fabricate all-polysaccharide composites.

MAB21L1 promotes survival of lens epithelial cells through control of αB-crystallin and ATR/CHK1/p53 pathway.

The male abnormal gene family 21 (mab21), was initially identified in C. elegans. Since its identification, studies from different groups have shown that it regulates development of ocular tissues, brain, heart and liver. However, its functional mechanism remains largely unknown. Here, we demonstrate that Mab21L1 promotes survival of lens epithelial cells. Mechanistically, Mab21L1 upregulates expression of αB-crystallin. Moreover, our results show that αB-crystallin prevents stress-induced phosphorylation of p53 at S-20 and S-37 through abrogating the activation of the upstream kinases, ATR and CHK1. As a result of suppressing p53 activity by αB-crystallin, Mab21L1 downregulates expression of Bak but upregulates Mcl-1 during stress insult. Taken together, our results demonstrate that Mab21L1 promotes survival of lens epithelial cells through upregulation of αB-crystallin to suppress ATR/CHK1/p53 pathway.

Fabrication of triboelectric polymer films via repeated rheological forging for ultrahigh surface charge density.

Triboelectric polymer with high charge density is the foundation to promote the wide range of applications of triboelectric nanogenerators. This work develops a method to produce triboelectric polymer based on repeated rheological forging. The fluorinated ethylene propylene film fabricated by repeated forging method not only has excellent mechanical properties and good transmittance, but also can maintain an ultrahigh tribo-charge density. Based on the film with a thickness of 30 µm, the output charge density from contact-separation nanogenerator reaches 352 µC·m-2. Then, the same film is applied for the nanogenerator with air-breakdown mode and a charge density of 510 µC·m-2 is further achieved. The repeated forging method can effectively regulate the composition of surface functional groups, the crystallinity, and the dielectric constants of the fluorinated ethylene propylene, leading to the superior capability of triboelectrification. Finally, we summarize the key parameters for elevating the electrification performance on the basis of molecular structure and related fabrication crafts, which can guide the further development of triboelectric polymers.

From Waste to Wealth: A Lightweight and Flexible Leather Solid Waste/Polyvinyl Alcohol/Silver Paper for Highly Efficient Electromagnetic Interference Shielding.

With the popularization of 5G communications and the internet of things, electromagnetic wave (EW) radiation pollution has aroused much concern from the public, and the search for new materials and technologies for preparing electromagnetic shielding materials still continues all around the world. However, the contradiction among high shielding performance, economic applicability, and flexibility is still not well balanced. Herein, we fabricated a novel foldable leather solid waste (LSW)/polyvinyl alcohol (PVA)/silver (Ag) paper with excellent electromagnetic interference (EMI)-shielding ability using a facile but sustainable electroless plating (ELP) method with LSW as the resource. Taking PVA as a cross-linker, debundled leather fibers (LFs) generated by solid-state shearing milling could generate a flexible LSW/PVA substrate with a high specific surface area, and eventually the deposited Ag layer served as a protective layer not only to significantly improve the mechanical and thermal robustness, but also to endow the LSW/PVA/Ag paper with good hydrophobicity, which could protect from potential moisture damage. In addition to the reflection effect of metallic Ag on EW, the hierarchical structure of collagen fibers played an important role in superior high EMI-shielding effectiveness (∼55-∼90 dB) by an absorption-dominant EMI-shielding mechanism. Furthermore, a multilayer LSW/PVA/Ag paper was also prepared with enhanced EMI-shielding effectiveness of 111.3 dB benefited by constructing multiple reflection-absorption interfaces. The high-performance, environmentally friendly, and low-cost EMI-shielding materials not only offered a new avenue toward recycling LSW in a more value-added way, but also displayed promising potential for application in flexible shielding materials or wearable clothing.

Improved Properties of Metallocene Polyethylene/Poly(ethylene terephthalate) Blends Processed by an Innovative Eccentric Rotor Extruder.

* Correspondence: pmhzhe@scut [...].

Immunization with a peptide mimicking Lipoteichoic acid protects mice against Staphylococcus aureus infection.

Lipoteichoic acid (LTA), a major component of the cell wall of Staphylococcus aureus (S. aureus), is not generally considered as an ideal vaccine candidate since it is a thymus-independent antigen. In this study, we screened a 12-mer phage peptide library and identified a series of peptide sequences that can mimic the epitope of LTA. A tetra-branched multiple antigenic peptide, named MAP2-3, comprising one of the positive peptide sequences (GHKEDRQWCQHS), was synthesized. Immunization with MAP2-3 induced LTA-specific IgG antibodies, prolonged the survival time, and decreased the bacterial burden in organs of mice infected with S. aureus. Moreover, passive immunization with polyclonal anti-MAP2-3 sera reduced bacterial load in organs of mice with bacteremia, alleviated acute lung injury in mice with pneumonia, and decreased the size of lesions in mice with skin infection. The number of LTA-specific antibody-secreting cells in the spleen of MAP2-3 immunized mice were significantly higher than that in the control mice. In summary, as a surrogate of LTA, vaccination with MAP2-3 elicited humoral immune response and protected mice from S. aureus infection. This study provides a new option to design vaccines against S. aureus.

A Multiple Antigenic Peptide Mimicking Peptidoglycan Induced T Cell Responses to Protect Mice from Systemic Infection with Staphylococcus aureus.

Due to the enormous capacity of Staphylococcus aureus to acquire antibiotic resistance, it becomes imperative to develop vaccines for decreasing the risk of its life-threatening infections. Peptidoglycan (PGN) is a conserved and major component of S. aureus cell wall. However, it has not been used as a vaccine candidate since it is a thymus-independent antigen. In this study, we synthesized a multiple antigenic peptide, named MAP27, which comprised four copies of a peptide that mimics the epitope of PGN. After immunization with MAP27 five times and boosting with heat-inactivated bacterium one time, anti-MAP27 serum bound directly to S. aureus or PGN. Immunization with MAP27 decreased the bacterial burden in organs of BALB/c mice and significantly prolonged their survival time after S. aureus lethal-challenge. The percentage of IFN-γ(+)CD3(+) T cells and IL-17(+)CD4(+) T cells in spleen, as well as the levels of IFN-γ, IL-17A/F and CCL3 in spleen and lung, significantly increased in the MAP27-immunized mice after infection. Moreover, in vitro incubation of heat-inactivated S. aureus with splenocytes isolated from MAP27-immunized mice stimulated the production of IFN-γ and IL-17A/F. Our findings demonstrated that MAP27, as a thymus-dependent antigen, is efficient at eliciting T cell-mediated responses to protect mice from S. aureus infection. This study sheds light on a possible strategy to design vaccines against S. aureus.

Meta-analysis of GSTT1 null genotype and preterm delivery risk.

Glutathione S-transferase T1 (GSTT1) null genotype has been indicated to be correlated with preterm delivery (PTD) susceptibility, but study results were still debatable. Thus, a meta-analysis was conducted. PubMed, EMBASE, and CNKI were searched. Odds ratios (ORs) with 95% confidence intervals (CIs) were used to calculate the strength of association in the random-effects model or fixed-effects model. Nine case-control studies with a total of 2526 cases and 4565 controls were eligible. The null genotype of GSTT1 was associated with a significantly increased risk of PTD when compared with present genotype (OR = 1.18; 95% CI 1.05-1.33; I(2) = 33). In the subgroup analysis according to ethnicity, significantly increased PTD risk was observed in Asians (OR = 1.20; 95% CI 1.01-1.33; I(2) = 0%) but not in Caucasians (OR = 1.32; 95% CI 0.89-1.97; I(2) = 77). This meta-analysis suggested that GSTT1 null genotype may be associated with the risk of PTD.

Sumoylation differentially regulates Sp1 to control cell differentiation.

The mammalian small ubiquitin-like modifiers (SUMOs) are actively involved in regulating differentiation of different cell types. However, the functional differences between SUMO isoforms and their mechanisms of action remain largely unknown. Using the ocular lens as a model system, we demonstrate that different SUMOs display distinct functions in regulating differentiation of epithelial cells into fiber cells. During lens differentiation, SUMO1 and SUMO2/3 displayed different expression, localization, and targets, suggesting differential functions. Indeed, overexpression of SUMO2/3, but not SUMO1, inhibited basic (b) FGF-induced cell differentiation. In contrast, knockdown of SUMO1, but not SUMO2/3, also inhibited bFGF action. Mechanistically, specificity protein 1 (Sp1), a major transcription factor that controls expression of lens-specific genes such as ß-crystallins, was positively regulated by SUMO1 but negatively regulated by SUMO2. SUMO2 was found to inhibit Sp1 functions through several mechanisms: sumoylating it at K683 to attenuate DNA binding, and at K16 to increase its turnover. SUMO2 also interfered with the interaction between Sp1 and the coactivator, p300, and recruited a repressor, Sp3 to ß-crystallin gene promoters, to negatively regulate their expression. Thus, stable SUMO1, but diminishing SUMO2/3, during lens development is necessary for normal lens differentiation. In support of this conclusion, SUMO1 and Sp1 formed complexes during early and later stages of lens development. In contrast, an interaction between SUMO2/3 and Sp1 was detected only during the initial lens vesicle stage. Together, our results establish distinct roles of different SUMO isoforms and demonstrate for the first time, to our knowledge, that Sp1 acts as a major transcription factor target for SUMO control of cell differentiation.